Tesla Model Y: Before Using Summon

Before operating Summon, use the touchscreen to enable it and customize how you want it to work. Touch Controls > Autopilot > Customize Summon and adjust the following settings to suit your preferences:

• Bumper Clearance: Set the distance that you want Summon to stop from a detected object (for example, you may want Summon to stop within just a few inches of a garage wall). Note that this distance applies only to objects that Summon detects directly in front of Model Y when moving forward, or directly behind Model Y when reversing.
• Summon Distance: Set a maximum distance that Model Y can travel when entering or exiting a parking space.
• Side Clearance: Choose an option to specify how much side clearance you want to allow. Tight allows Model Y to enter and exit very narrow parking spaces.

WARNING: Parking in a narrow space limits the ability of the sensors to accurately detect the location of obstacles, increasing the risk of damage to Model Y and/or surrounding objects.

• Require Continuous Press: By default, Summon requires that you press and hold a button on the mobile app to move Model Y during the parking process. When Require Continuous Press is set to No, you can press and release the button-you don't need to hold it down to keep the vehicle moving. Also, when Require Continuous Press is set to No, you can operate Summon using the key fob instead of the mobile app (see Operating Summon with the Key Fob) and you can start a parking sequence from inside the vehicle (see Starting Summon Before Exiting the Vehicle).
• Use Auto HomeLink (if equipped): Set to ON if you want to activate HomeLink to open/close a programmed HomeLink device (such as a gate or a garage door) during the parking process when using Summon. If enabled, the device automatically opens and closes when Model Y enters or exits during a Summon session. In a Smart Summon session (if equipped), the device automatically opens when, at the beginning of a session, Smart Summon detects that Model Y is parked in a garage.

WARNING: Always ensure that Model Y is fully in or out of a garage before HomeLink lowers the garage door. Summon and Smart Summon (if equipped) cannot detect where an overhead door will lower.

NOTE: When enabled, the HomeLink device automatically opens and closes when using Summon, and automatically opens as needed when using Smart Summon (if equipped). To automate HomeLink in other situations (such as normal driving), you must adjust the HomeLink device's main settings by touching the HomeLink icon at the top of the Controls screen (see HomeLink Universal Transceiver).

NOTE: The above settings, with the exception of HomeLink, apply only to Summon-not Smart Summon (if equipped) (see Before Using Smart Summon). You cannot customize Smart Summon's bumper clearance, distance, and side clearance. And when using Smart Summon, you must always hold down the button on the mobile app to keep Model Y moving. Also, Smart Summon operates with the mobile app only-not the key fob.

NOTE: All settings are retained until you manually change them.

READ NEXT: